Compiz Fusion Not Starting (No whitelisted driver found)

[Sugz]

I have just sucessfully installed the New Ati Drivers 8.43

andy@hh206a:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON X800 GTO
OpenGL version string: 2.1.7059 Release


And Beryl Works very well (apart from the Window Decs)

So i decided to uninstall Beryl and install Compiz Fusion all went well apart from this

andy@hh206a:~$ compiz --replaceChecking for Xgl: not present.
No whitelisted driver found
aborting and using fallback: /usr/bin/metacity
Window manager warning: "" found in configuration database is not a valid value for keybinding "toggle_shaded"


And finally, here is my X11/conf File.


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "Files"

# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
# Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 31-80
VertRefresh 56-75
Option "DPMS"
EndSection

Section "Device"
Identifier "ATI Technologies Inc R423 UI [Radeon X800PRO (PCIE)]"
Driver "fglrx"
Option "UseInternalAGPGART" "no"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "MonitorLayout" "AUTO, AUTO"
BusID "PCI:1:0:0"
Option "AddARGBGLXVisuals" "true"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc R423 UI [Radeon X800PRO (PCIE)]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "1"
# Option "RENDER" "1"
EndSection


Any help on how to Get Compiz fusion WOrking will be greatly appreciated.
As Beryl Works But why not Compiz?

Thanks in advance

-Sugz

[adamk]

Try starting compiz with:

$ SKIP_CHECKS=yes compiz --replace ccp &

If that works, you can get it to permanently skip the checks with:

$ mkdir -p ~/.config/compiz; echo SKIP_CHECKS=yes >> ~/.config/compiz/compiz-manager

[Sugz]

Good lord t works.
Thank you ever so much. I think you earn yourself a brownie point ha :p